Amplificador de 2 canales, 500 watts TYG PA2450 / Centro del sonido

STEREO MODE (Both Channels Driven)
8 ohms
FTC 20 Hz – 20 kHz, 0.1% THD	450 W
EIA 1 kHz, 0.1% THD	500 W
4 ohms
FTC 20 Hz – 20 kHz, 0.1% THD	650 W
EIA 1 kHz, 0.1% THD	750 W
2 ohms
EIA 1 kHz, 1% THD	1200 W
BRIDGE MONO MODE
8 ohms
FTC 20 Hz – 20 kHz, 0.1% THD	1300 W
EIA 1 kHz, 0.1% THD	1500 W
4 ohms
EIA 1 kHz, 1% THD	2400 W

Signal to Noise, 20 Hz-20 kHz:	100 dB
Distortion (SMPTE-IM):	Less than 0.02%
Input Sensitivity @ 8 ohms:	1.23V (+4.0 dBu)
Voltage Gain:	50x (34 dB)
Output Circuitry:	Class H
Power Requirements 1/8 power pink noise at 4 ohms *	7A
OTHER FEATURES
Distortion (Typical)
20 Hz – 20 kHz: 10 dB below rated power	Less than 0.03% THD, 4 and 8 ohms
1.0 kHz and below: full rated power	Less than 0.03% THD, 4 and 8 ohms
Frequency Response:	20 Hz-20 kHz, ±1 dB -3 dB points: 5 Hz – 50 kHz
Damping Factor, 1 kHz and below:	Greater than 300 at 8 ohms
Input Impedance:	10k ohms unbalanced, 20k ohms balanced
Input Clipping:	10 Vrms (+22 dB)
Cooling:	Continuously variable-speed fan, rear-to-front air flow
Connectors, each channel:	Input: Active balanced; barrier strip, XLR and 1/4″ (6.3mm) TRS tip and XLR (pin 2 positive) Output: touch-proof binding posts and Neutrik® Speakon®
Controls:	Front: AC switch, Ch. 1 and Ch. 2 gain knobs Rear: 10-position DIP switch
Indicators:	Power-On: Green LED Signal: Yellow LED (1 per channel) Clip: Red LED (1 per channel)
Amplifier Protection:	Stable into reactive or mismatched loads
Load Protection:	On/off muting, AC coupling (850, 1450), triac crowbar (1850HD, 2450, on each channel)
Power Requirements:	100, 120, 230 VAC, 50-60 Hz
Dimensions:	19″ (48.3 cm) rack mounting, 3.5″ (8.9 cm) tall (2 RU), 15.9″ (40 cm) deep (rack mounting to rear support ears)
Weight:	44.5 lbs (20.2 kg) net